1.0 QUICK START
1.Plug the AC power cable into the mains socket on the rear panel, then plug it into a wall socket.
2.Turn the MASTER knob down and plug your guitar into the jack labeled INPUT.
5
INPUT
010 MASTER
3.Switch the zenAmp on by flipping the POWER switch and adjust it to the desired volume using the MASTER knob. Preset number 1 is always activated when you first power up the amp.
4.You can call up the first five user presets by pressing buttons 1 to 5.
MANUAL 1 | 2 | 3 | 4 | 5 |
6.To create a preset of your own, please proceed as follows:
6.1Rotate the AMP TYPE knob to select the desired amp model.
| CALIFORNIA HOT |
HOT CLASS A | PLEXI 50 |
BRIT CLASS A | PLEXI 100 |
TWEED 4 x 10 | HOT PLEXI |
TWEED DELUXE | BRIT HI GAIN |
BLACK FACE | BRIT ULTRA GAIN |
JC CLEAN |
|
JAZZ CLEAN | WARP |
ACOUSTIC |
|
6.2Adjust GAIN, BASS, MID, TREBLE and PRESENCE to taste and adjust the volume using the PRESET VOLUME knob.
| 5 |
|
|
|
|
| 5 |
0 | 10 | 0 | 10 | ||||
|
|
|
| ||||
| GAIN | BASS | MID | TREBLE | PRESENCE | PRESET VOL |
6.3Select the desired effects via FX TYPE and/or DELAY TYPE and adjust FX PARAMETER, REVERB VOL, and/or DELAY VOL to taste.
PRESETS
5.To call up the 25 factory presets, please proceed as follows:
5.1Press and hold the MANUAL button until it begins flashing.
ca. 2 sec.
MANUAL 1 | 2 | 3 | 4 | 5 |
PRESETS
5.2You can now activate individual factory sound banks 1 to 5 by pressing one of the preset buttons 1 to 5.
MANUAL 1 | 2 | 3 | 4 | 5 |
PRESETS
5.3Individual presets in the respective bank are activated by pressing preset buttons 1 to 5 again.
| TREMOLO | TAP | TAPE SPACE | |
COMPRESSOR | STROBE | HALLO DRY | ||
TAPE MULTI REPEAT | ||||
MID BOOST | CHORUS MONO | TAPE MULTI DRY | HALLO REPEAT | |
CHORUS STEREO | TAPE ECHO SPACE | HALLO SPACE | ||
FUZZ | PHASER | TAPE ECHO REPEAT | PING PONG |
WAH WAH 1 | PHASER XL | TAPE ECHO DRY | STEREO REPEAT |
WAH WAH 2 | FLANGER MONO | ECHO REPEAT | STEREO SPACE |
MOD WAH | FLANGER STEREO | ECHO DRY | |
BYPASS |
| STEREO |
|
| 0 | 10 | 0 | 10 |
FX PARAMETER | REVERB VOL | DELAY VOL |
6.4Press STORE, then one of the channel buttons, and then STORE again in order to store the sound that you have devised.
3 | 4 | 5 | 2 | 3 |
|
|
RESETS | PRESETS |
7.Press the MANUAL button in order to defeat the stored setting. MANUAL always enables the front panel knob settings (see chapter 4.2).
6