![](/images/new-backgrounds/1267960/26796047x1.webp)
Attaching the base To attach the base to the router:
1. Position the router and pedestal base Figure 3.
Figure 3: Attaching the router to the pedestal base
2.Starting with the router bottom about ½ inch from the bottom of the pedestal base, slide the router into the base until the router locks into position.
Removing the base If you need to remove the router from the pedestal base:
1.Pull the release tab on the bottom of the base down. (See Figure 3.)
2.Slide the base away from the router.
10
Chapter 3 • Assembling and connecting the HN router hardware