Humax NA-FOX, F1-FOX GB31, Network Search, Automatic Skip, Advanced, Video PID/Audio PID/PCR PID

Guide of Main Menu

Network Search

•You can select Yes or No. When you select “Yes”, you can find more transponders using the home network.

•As it refers to NIT during searching, if there is the frequency information of other transponder, it searches the other transponders besides the transponder that the user inputs.

Automatic Skip

•You can select Yes or No. When you select “Yes”, the search will skip all scrambled services.

•When the found services are scrambled during searching, they are not listed up.

Refer to descriptor of PMT whether it is scrambled or not.

Advanced...

Performs a manual search with the ability to enter PID(Video/Audio/ PCR) values. This mode is necessary when you search for the signal that has abnormal service Information tables.

The setting of the sub items is the same as Manual Search.

•Video PID/Audio PID/PCR PID

You can set PID to search for services.

1.Use the buttons to select PID input mode.

2.Use the NUMERIC buttons(0~9) on the remote control unit to enter a decimal PID value.

3.In the hexadecimal input mode, press one of the NUMERIC buttons(0~9) to display a hexadecimal keyboard.

4.Enter a hexadecimal PID value.

Note : If no PID is input(Auto is displayed), the Advanced Search functions same as Manual Search.

5.After the above mentioned value is set, press the OK button to start Service Search.

Note : The picture and the found service list during Advanced Search are identical with the ones during Manual Search.

GB31