Humax IRCI-5400Z manual Common Interface, E29, STB Status, Signal Detection

Press the button anywhere to start Automatic Search. The picture during searching is as follows.

The picture searches with varying Frequency, Symbol Rate and FEC etc. Satellite Name is the name that the user selects to correspond with Antenna Alternative of Antenna Setting.

The progress bar(%) appears on bottom of the picture.

During the search, services that are found are displayed as follows:

1.Press the button during Automatic Search to stop search.

2.After the search is finished, the appearite message appears.

3.Press the button to return Service Search menu.

4-4. Status

STB Status

Displays the information of H/W Version, S/W Version, Loader Version and CI CAM of STB and so on.

Signal Detection

Shows the Signal Level(AGC level) and Signal Quality(BER) of the current service and is help to the initial antenna setting.

4-5. Common Interface

You can enjoy not only scrambled services using the Conditional Access Modules (CAM), but also Free-To-Air services.

This STB currently supports six kinds of CAM (VIACCESS™, Nagravision, CONAX, CryptoWorks(TM), Irdeto or Mediaguard). Common Interface module and Smart Card depend on the service provider. If you need CAM, contact your service provider or distributor.

Note : If CAM is not used, then only Free-To-Air services are available.

E29