Chapter 2

Unpacking

2.1Opening the Delivery Package

The HS-7238 is packed in an anti-static bag. The board has components that are easily damaged by static electricity. Do not remove the anti-static wrapping until proper precautions have been taken. Safety Instructions in front of this manual describe anti-static precautions and procedures.

2.2Inspection

After unpacking the board, place it on a raised surface and carefully inspect the board for any damage that might have occurred during shipment. Ground the board and exercise extreme care to prevent damage to the board from static electricity.

Integrated circuits will sometimes come out of their sockets during shipment. Make sure all integrated circuits, particularly the BIOS, processor, memory modules, ROM-Disk, and keyboard controller chip are firmly seated. The HS-7238 delivery package contains the following items:

HS-7238 Board x 1Utility CD Disk x 1 ATA/100 IDE flat cable x 2 FDD flat cable x 1Printer cable with bracket x 1

Two RS-232 COM Port cable with bracket x 1 8-pin USB split type cable with bracket x 1 PS/2 KB/MS transfer cable x 1

MIC/Audio 8-pin cable x 1 Cooling Fan & HeatSink x 1 Jumper Bag x 1User’s Manual

5