Installing the Glass Bowl
7-3. First install B10 candelabra bulbs (40 Watt Maximum) into the sockets.
7-4. Thread the pull chains through the holes in the metal disc. Then, thread the pull chains through the hole in the center of the glass bowl.
7-5. Thread the pull chains through the grommet holes on the sides of the cover plate.
7-6. Place the cover plate up against the glass bowl. Align the holes in the cover plate with the holes in the metal disc.
7-7. Pull down on each pull chain to make sure they move easily. If you feel any resistance when you pull the chains down, rotate the cover plate to realign the holes in the cover plate with the holes in the metal disc. Make sure both pull chains move down freely and make a clicking noise in the switch housing.
7-8. Screw the finial onto the threaded rod end until tight.
7-9. Attach the extra pull chains (included) to the fan pull chain and light pull chain using the plastic breakaway connector. (You may find the plastic breakaway connector on the end of the extra chain.)
Breakaway
Connector
