Hunter Fan 27177, 41536-01 owner manual A code to start the search at

setting up your remote control

checking your device code

TV VCR DVD CBL/SAT 1. Press and hold the device button for 3 seconds. The red indicator light comes on and goes off.

2.Release the device button. The red indicator light comes on as you release the device button.

3. Press and release the SELECT button. The red indicator light should go off.

4. The red indicator light should indicate the code by flashes and pauses. A quick flash indicates a zero in the code. The red indicator light will indicate each digit of the code by the number of flashes. There should be a short pause between each digit of the code.

	searching for your device code
TV	VCR DVD CBL/SAT 1. Using programming your device code, program
	in a code to start the search at.

2.Press and hold the device button for 3 seconds. The red indicator light comes on and goes off.

4.	Release the device button. The red indicator light
POWER	comes on as you release the device button.
5.	Press and release the POWER button.

6. Press the CHANNEL button to search for your device code. The remote sends out a power signal that will turn off the device if it is the correct code. The remote will automatically move to the next code number every ten seconds and it will be signified by the red indicator light blinking on then off. You may also advance to the next code manually by pressing the CHANNEL button.

7. When the device turns off, press and release the SELECT button to store the code.

8. The red indicator light should rapidly flash 8 times to indicate that the code search is completed. The remote then exits to the normal operating mode.

6 41536-01 1/25/2002