Hunter Fan 28492 Step, Hardware Needed, Washer, Lower TableAdapter Upper Adapter, 64187-01-247

2.Attach the upper adapter to the table with six adapter screws with washers. Thread the lower adapter into the upper adapter and rotate one to two turns.

Note: The lower adapter should not be over-tightened. It should remain loose in the upper adapter to properly attach to the table.

Step 2

Hardware Needed:

Adapter Screw 64193-03-247 (x 6)

Table

Hardware Needed:

Washer

Lower

TableAdapter

Upper

Adapter

64187-01-247

(x 6)

Table

Lower Pole

Segment

Step 3-4

3.Being careful not to damage the pole finish, (with assistance from at least one other person) place the hole in the center of the table over the lower pole segment. Align the notch in the lower adapter with the bolt. Rest the table on the bolt.

4.With the notch resting on the bolt, rotate the table clockwise to secure it to the pole.