Assembling and Hanging the Fan | Hunter Fan 2A instruction

3 • Assembling and Hanging the Fan

Step 3-1

Square

Hanger

Motor

Assembly

Step 3-2

3-1. Position the square hanger so that the green ground wire attached to the square faces out of the large opening in the metal bracket.

3-2. Holding the wires out of the way, lift the motor assembly and place the square hanger into the opening in the ceiling plate.

WARNING: Make sure the square hanger can not rotate in the metal bracket. Failure to do so could result in the fan falling.

3-3. Install two locking screws through the holes in the side of the metal bracket to secure the square hanger.

Green

Ground Wire

Green

Ground Wire

Step 3-3

#8-32 x 1” Screw

Locking Screw

42883-01 • 08/27/09 • Hunter Fan Company