SAFETY INSTRUCTIONS
Save These Important Instructions
1.This Air Purifier is designed for use on a flat, level surface and may not work properly on an uneven surface. ALWAYS place this Air Purifier on a firm, level surface. ALWAYS place the Air Purifier at least six (6) inches away from walls and three (3) feet from heat sources such as stoves, radiators, or heaters.
2.Place the Air Purifier in an area that is out of the reach of children.
3.Before using the Air Purifier, extend the cord and inspect for any signs of damage. DO NOT use the product if the cord has been damaged.
4.To reduce the risk of electric shock, this product has a polarized plug (one blade is wider than the other) as a safety feature. This plug will fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. DO NOT attempt to defeat or override this safety feature.
5.ALWAYS UNPLUG the Air Purifier when it
is not in operation, while the filter is being changed, and while it is being cleaned.
6.DO NOT tilt or move the Air Purifier while it is in operation. Shut off and unplug before moving.
7.DO NOT immerse the Air Purifier in water as permanent damage will occur. Refer to and follow the CLEANING AND FILTER REPLACEMENT instructions.
8.DO NOT run the ionizer if tobacco smoke, air fresheners, dripless wax candles, or grease from cooking is present.
quickly and effectively removing dust, smoke, and pollen particles as small as .3 microns in size. Room air is pulled in through the front grill where larger particles and odors are caught on the
Using Your Air Purifier
1.Take the air purifier out of the box and remove the clear plastic protective bag. Place the unit on a firm level surface.
2.Before turning the Air Purifier “on”, You
need to open the front cover and remove the protective plastic that is surrounding the HEPAtech™ system filter. Press the buttons that are on each side of the front grill (See Figure 1). When they are pressed inward, you will be able to pull the front grill forward, opening the unit.
3.The filter comes to you installed in the correct position. Grasp the filter, and pull it forward, up, and out of the unit. Remove the plastic wrapping and replace the filter in the unit. The white HEPAtech™ filter material should be facing outward (towards you).
4.Before closing the front cover, check the placement of the
5.Close the front cover by once again pressing the buttons and allowing the front cover to slip into place over the buttons. The unit is now ready for normal operation.
Instructions
6. Plug the unit into a 120V electrical outlet.
Thank you for purchasing the HEPAtech™ Air Purification System from Hunter Fan Company. You have purchased our latest development in portable Air Purification Systems. This system has been developed to improve the quality of the air you breathe.
Our HEPAtech™ Air Purification System out performs other air purification systems by
©2011 Hunter Fan Company | 2 |
