Operating Your Air Purifier
7.Select a speed by sliding the speed selector to the appropriate location. The red power light will be illuminated when you have selected a speed.
8.Turn the ionizer ‘on’, by sliding the ionizer switch to the ‘on’ position. The green light will be illuminated when the ionizer is ‘on’.
NOTE: The ionizer can release negative ions when the fan is not blowing. If it is used consistenly without the fan, the dust particles that are attracted to the negative ions may deposit on your walls and floors. To minimize these deposits, we recommend that you use the ionizer only when the fan is blowing (when the unit is on LO, MED, or HI speed).
FILTER
FRONT
GRILL
| RELEASE | |
WASHABLE | BUTTON | |
(ON EACH SIDE) | ||
| ||
| COLOR CODED | |
| FILTER CHART | |
POWER |
| |
CONTROL |
|
IONIZER
Figure 1.
Power Control - Choose Hi, Med, or Lo speed. The red light will be illuminated when the power is ‘ON’.
Ionizer - Allows you to turn the ionizer ‘ON’. The green light will be illuminated when the ionizer is ‘ON’.
Cleaning and filter Replacement
1.Clean the outside of the unit with a soft, damp cloth. Figure 3.
2.At least every 90 days, open the front grill, remove the carbon
3.Every 6 months you should remove the front grill and check the HEPAtech filter to see if it needs to be replaced. Compare the color of the filter to the filter change chart located above the filter in the air purifier.
How the Hepatech System Works
| Pet Hair & |
Dust | Pollen Odors Bacteria Dander |
Carbon HEPAtech® Ionizer
Microns
The above is an illustration of how the HEPAtech™ air purification system works. Dust and other irritants are pulled into the air purification system and cleaned through the Carbon
©2011 Hunter Fan Company | 3 |