Programming

Setting Day and Time

Setting the correct day and time allows the programs to work effectively and provides a clock for your reference. Although the instructions for setting the day and time are listed under Initial Operation, they are repeated below for your convenience.

Adjusting Day and Time: (For example, Wednesday at 3:45 pm)

1.To set the day or time, press the DAY/TIME key. All display features except the day and time will go blank and the hour will flash.

2.Use the UP/DOWN keys to adjust the hour. Tapping the key will advance the hour by increments of one. Holding down the key will change the hour rapidly. Note the AM/PM indicator as you cycle through a 24 hour period.

3.Press the DAY/TIME key again. Now, the minutes will be flashing. Use the UP/DOWN keys to adjust the minute. Tapping the key will change the minute by in- crements of one and holding the key will change the minute rapidly.

4.Press the DAY/TIME key to accept the minute setting and go to the day of the week. Use the UP/DOWN keys to set the current day.

Fig. 18

Fig. 19

Fig. 20

5. Press the DAY/TIME key a final time to accept the day setting and return to Normal mode.

Fig. 21

41959-01

 

14

41959-01_3.30.06.pmd

14

3/30/06, 3:15 PM