|
| Troubleshooting |
|
Problem | Solutions |
| |
|
|
|
|
1. | No Display | • Confirm that the unit is plugged in. |
|
|
| • Check the installation of the front grill. |
|
|
| • Reset the air purifier. (See Resetting the Air Purifier |
|
|
| on pg. 19.) |
|
|
|
|
|
2. | Display reads “door.” | • The front grill is not attached properly. Remove grill from |
|
|
| unit and |
|
|
|
|
|
3. | Program number | • Unit is in temporary program override mode. Refer to |
|
| is flashing. | Override of Auto Mode on pg. 12. |
|
|
|
|
|
4. | Programs are | • Confirm that the unit is in Auto Mode. The Auto |
|
| not running. | indicator should be lit and a program number should be |
|
|
| illuminated. (See Auto Mode on pg. 10.) |
|
|
| • Review program settings to confirm program set |
|
|
| points. (See Reviewing Programs on pg. 18 for |
|
|
| additional information.) |
|
|
|
|
|
5. | Time is not correct | • Check that the proper display is chosen. (See Display |
|
|
| Modes on pg. 9). |
|
|
| • Set the time. (See Setting the Day/Time on pg. 14.) |
|
6.Keypad does not work or display reads “Lock.”
•Key pad has been locked to prevent accidental changes to the programs. (See Keypad Lock on pg. 18 to unlock the key pad.)
7. | Erratic Display or | • | Reset the air purifier. (See Resetting the Air Purifier |
| Operation. |
| on pg. 19.) |
|
|
|
|
8. | Filter and/or | • | The Filter and/or |
| Indicator is Flashing. |
| estimated usage times. Check and replace or clean filters if |
|
|
| needed. (Refer to Filter and |
9.Unit has reduced air flow or increased noise.
•The filter is clogged and should be changed. (Refer to Cleaning the Filter on pg. 21.)
10.Remote is not working properly.
•Be sure that the remote is facing the air purifier when pressing the key.
•Check the batteries. (Refer to Remote Operation on page 8.)
Technical Support
If you have any additional questions or problems with your Hunter air purifier, please call
| 23 | |
23 | 3/30/06, 3:15 PM |