current Fan speed setting. Press the Speed button until the LED Display shows your desired Fan speed setting, Low (1), Medium (2), or High (3). Release the Speed button. After 2 seconds, the Fan speed is set and the LED Display will show the relative humidity.

10.During normal operation, the LED Display will show the relative humidity of the space in which you place your humidifier.

Features and Options

Automatic Shut-Off

When the Water Tank is empty, the humidifier will automatically turn off and the red Refill Tank LED will turn on. The Refill Tank LED will turn off when the Tank is refilled and placed back on the humidifier.

Timer

You can set your humidifier to run for pre-set periods of time.

1.To see the current Timer setting, press the Timer button once.

2.To change the Timer setting, press the Timer button and hold it for 3 seconds. The current Timer setting will begin to flash.

3.Press the Timer button again to change the setting. The settings in hours are OF (Off), 2, 4, 8 and 10.

4.When the LED Display shows your desired run time, release the Timer Button. After 2 seconds, the run time is set and the LED Display will show the relative humidity.

5.The humidifier will shut down automatically when the set time expires.

Span Setting

Your humidifier is set at the factory to cycle at setting 2. If you find your humidifier is cycling either too often of not often

enough, change the Span setting to change the cycle time.

1.To see the current Span setting, press both the Humidity and Speed buttons.

2.To change the Span setting, Press and hold both the Humidity and Speed buttons for 3 seconds. The LED Display will flash the current Span Setting.

3.Press the Speed button to change the Span setting. Set the Span to 3 to increase the humidifier’s run time. Set the Span to 1 to decrease the humidifier’s run time.

4.When the LED Display shows your desired Span setting, release the Speed button. After two seconds, the Span is set and the LED Display will show the relative humidity.

The NiteGlo™ Night Light

Press the NiteGlo™ button on the Control Panel to turn the night light on and off.

NOTE: The NiteGlo™ night light is inoperable when the humidifier is turned off.

Refilling The Water Tank

1.When the water tank level is low, turn the humidifier ‘OFF’, and unplug.

2.Remove the tank and take it to the sink or tub to refill.

3.Turn the tank upside down and unscrew the tank cap by turning it counterclockwise. Empty the tank, refill with fresh cool water (never use hot water), and replace the tank cap. Be sure not to overfill the tank as water damage may occur to furniture or flooring due to spillage. HUNTER WILL NOT ACCEPT RESPONSIBILITY FOR DAMAGE TO PROPERTY CAUSED BY WATER SPILLAGE.

4.Carry the tank back to the humidifier. Turn the tank upright and place it on the humidifier. Be sure that the tank is seated properly in the Tray. If the tank is properly located on the Tray, you will see air bubbles flowing up into the tank.

Humidifier Maintenance

Many regions have hard water with high concentrations of minerals. When water evaporates from The Hunter® Evaporative Humidifier, minerals may be left behind. These minerals can form a hard white scale which can be removed by following the cleaning instructions. The frequency of cleaning due to mineral build up can vary depending upon the quality of water you may have. Refer to Figure 1 for part names.

1.Turn the humidifier ‘off’ and unplug the unit.

2.Lift the Main Housing as shown in Figure 5. The motor is attached to the main housing. Do not place the motor near water.

Grasp here

Figure 5

©2008 Hunter Fan Co.

4

43002 Rev 04-29

Page 3 Page 5
Page 4
Image 4
Hunter Fan 37407 manual Features and Options, Humidifier Maintenance
Page 3 Page 5

37407 specifications

The Hunter Fan 37407 is a distinguished ceiling fan that merges style with innovation, perfect for those seeking both aesthetics and functionality in their living spaces. This model is part of Hunter’s extensive lineup, known for its commitment to quality and performance.

One of the standout features of the Hunter Fan 37407 is its sleek design, which includes a contemporary silhouette that seamlessly integrates into various interior decor styles. Available in an array of finishes, including brushed nickel and matte black, it appeals to diverse tastes and helps elevate any room, whether it’s a cozy living room, a modern bedroom, or even a spacious kitchen.

Equipped with a powerful WhisperWind motor, the Hunter Fan 37407 ensures efficient airflow while operating quietly. This technology allows the fan to provide a strong breeze without the distracting noise often associated with ceiling fans. Perfect for bedrooms or study areas, users can enjoy a peaceful atmosphere ideal for relaxation or concentration.

Additionally, the fan features three adjustable speed settings, allowing users to customize airflow based on their comfort level. Whether it’s a gentle breeze on a warm day or maximum airflow during a summer heatwave, the Hunter Fan 37407 can easily accommodate varying needs.

The fan also prioritizes energy efficiency, making it a responsible choice for environmentally conscious consumers. The integration of LED lighting not only enhances illumination but also reduces energy consumption significantly compared to traditional incandescent bulbs. The fan includes a dimmable light kit, enabling users to set the perfect ambiance for any occasion.

Installation of the Hunter Fan 37407 is user-friendly, thanks to its straightforward instructions and included mounting hardware. The fan is compatible with both standard and angled ceilings, making it a versatile option for different room configurations.

In conclusion, the Hunter Fan 37407 is an impressive ceiling fan that combines elegance with advanced technology. With its stylish design, WhisperWind motor, adjustable speed settings, energy-efficient LED lighting, and easy installation, this ceiling fan stands out as a modern solution for enhancing both comfort and style in home environments.
Top Page Image Contents