9 • Completing Your Installation With a Bowl Light Fixture
Installing the Glass Bowl
9-1. Locate the (3) pins at the bottom of the (3) flanges on the plastic spacer.
9-2. Align the (3) pins with the (3) small clearance holes in the metal plate at the bottom of the globe assembly. Make certain the (2) pull chains are alinged with the (2) larger outboard holes in the metal plate.
9-3. Guide the threaded tube and both the chains through the larger holes in the metal plate. Lift the globe until the metal plate in the bottom of the globe bottoms out against the plastic spacer with the (3) pins sticking through the small holes in the metal plate.
9-4. Keeping the globe in position, place the large flat washer over the threaded tube and against the bottom of the globe. Thread the assembly nut on the threaded tube, running it up tight against the bottom of the washer. Tighten the nut very securely.
9-5. Assemble the finial to the bottom of the light fixture by guiding the (2) pull chains and threaded tube through the (3) openings in the finial.
Assembly Nut | Metal Disc |
|
Finial Cap | |
Steps 9-3-9-5 | Finial |
| |
15
41225-01 • 12/04/09 • Hunter Fan Company
