Hunter Fan 41225-01 installation manual Aligning the Fixture Fitter Continued

8 • Aligning the Fixture Fitter (Continued)

8-6.	Plug the upper and lower plug connectors together. The connectors	Fixture
	are keyed and will only go together one way. Before assembling	Trim
	the light fixture to the fixture fitter locate the arrow shaped hole	Fixture
	positioned directly behind one of the (3) screw clearance holes on
	the outside flange of the light fixture.	Fitter
8-7.	Align the arrow in the light fixture with the arrows previously used to
	align the fan trim and fixture fitter.
8-8.	Attach the light fixture to the fixture fitter using (3) 3/8” long
	Phillipsa round head screws with lock washers. Tighten the screws	Light
	securely.
		Fixture

8-9. Install (2) candelabra base bulbs. Refer to maximum wattage label on light fixture for maximum lamp wattage.

Step 8-6-8-8

Step 8-9

Note: In compliance with U.S. Federal energy regulations, this ceiling fan contains a wattage saver that restricts the light kit to a maximum of 190 Watts. Exceeding that limit or the specifications on the light sockets may result in fire hazard or improper operation. If lights do not appear to be operating properly, see the troubleshooting section

14

41225-01 • 12/04/09 • Hunter Fan Company