Hunter Fan 42508-01 installation manual operation

7 • Completing Your Installation With or Without a Multi Staked Light Fixture (Cont.)

7-6. To attach the lower switch housing, connect the upper plug
connector from the motor to the lower plug connector in the
lower switch housing assembly.
Note: Both plug connectors are polarized and will only fit together	Plug
one way. Make sure the connectors are properly aligned before	Connector
connecting them. Incorrect connection could cause improper	Lower
operation and damage to the product.
	Switch
7-7. Place the lower switch housing assembly over the upper switch	Housing
housing. Align the side screw holes in the upper and lower switch	Steps 7-6 – 7-7
housings. Attach the lower switch housing to the upper switch
housing

7-8. To install each shade, first loosen the three thumbscrews.

7-9. Raise the shade to the light fixture. Tighten the thumbscrews securely.

7-10.Install B10 candelabra base light bulbs (40 Watt maximum each).

Note: Glass shade style and number of lights may vary.	Plug
	Connector	Housing
	Detail	Assembly Screw

Thumbscrews		Shade
Note: In compliance with US federal energy regulations, this		Bulb
ceiling fan contains a device that restricts the light kit to a
maximum of 190 Watts. Exceeding that limit or the marked
limit on this product may result in fire hazard or improper
operation.	Steps 7-8 – 7-10

12

42508-01 • 09/23/08 • Hunter Fan Company