Note: If you do not want to install the light fixture, see “Uninstalling the Light Fixture” on page 12.
7-5. To attach the lower switch housing, connect the upper plug connector from the motor to the lower plug connector in the lower switch housing assembly.
Note: Both plug connectors are polarized and will only fit together one way. Make sure the connectors are properly aligned before connecting them. Incorrect connection could cause improper operation and damage to the product.
7-6. Place the lower switch housing assembly over the upper switch housing. Align the side screw holes in the upper and lower switch housings. Attach the lower switch housing to the upper switch housing with three #6-32 x 3/8” housing assembly screws. You will need to rotate the blade irons out of the way for each screw.
Installing the Shades and Bulbs
7-7. Remove the plastic from each of the shades.
7-8. Install the shades.
7-9. Install three B10 candelabra bulbs light bulbs (40 Watt maximum each).
Light Bulb
Shade
Steps 7-8 – 7-9
11
