7 • Completing Your Installation With or Without a Light Fixture (continued)
Uninstalling the Light Fixture
1.Loosen and remove the three screws that attach the light kit to the light kit mounting plate.
2.Uninstall the nut inside the lower switch housing.
3.Disconnect the plug connectors between the black wire and the black/white wire.
4.Disconnect the plug connectors between the two white wires.
5.Remove the two light kit assembly screws.
6.Unscrew the lower switch housing from the threaded rod.
7.Remove the light fixture from the lower switch housing
pulling disconnected wires through the hole in the center of the lower switch housing.
8.Install the switch housing cap and plug button to the lower switch housing.
9.Install the lower switch housing to the upper switch housing with three screws.
Step 1
Lower
Switch
Housing
Light Kit
Step 2
Nut
Lower |
|
Switch | Screws |
Housing | Step 9 |
|
| Cap |
Plug |
|
|
Button |
| Step 8 |
| ||
|
|
Light Assembly Screws
Step 5
12