Hunter Fan 42688-01 Go to Hardware Kit, Install the third housing assembly screw

7 • Completing Your Installation With a Multi Staked Light Fixture

Housing

Upper SwitchAssembly Screw

Housing

Plug

Connector

Steps 7-1 – 7-2

Housing

Assembly

Screw

Go to Hardware Kit 7

WARNING: Use only the light fixture supplied with this fan model.

7-1. To attach the lower switch housing assembly to the fan, partially install two housing assembly screws into the upper switch housing.

7-2. Connect the upper plug connector from the motor to the lower plug connector in the lower switch housing assembly.

Note: Both plug connectors are polarized and will only fit together one way. Make sure the connectors are properly aligned before connecting them. Incorrect connection could cause improper operation and damage to the product.

7-3. Align the notches in the sides of the lower switch housing with the screws on the upper switch housing. Twist the lower switch housing and the light kit/speaker assembly clockwise to lock the screws in place.

7-4. Install the third housing assembly screw.

7-5. Tighten all three screws securely.

Lower Switch

Housing

Notch

Steps 7-3 - 7-5

10

42688-01 • 05/08/09 • Hunter Fan Company