Hunter Fan 42693-01 warranty Wiring the Fan

Models: 42693-01

1 19
Download 19 pages 40.37 Kb
Page 9
Image 9
4 • Wiring the Fan

4 • Wiring the Fan

C

 

 

 

A

 

 

 

 

 

 

B

 

 

 

 

 

Receiver

 

 

F

D

E

Antennae

 

 

 

Step 4-3

 

 

A • Ground/Green

 

Step 4-4

 

 

B

• Ceiling Black

 

 

• Receiver Black: “LIVE IN”

 

C • Ceiling White

 

 

• Receiver White: “NEUTRAL IN”

 

Step 4-5

 

 

D • Fan Black/White

 

 

• Receiver Black/White: “LIGHT OUT”

E

• Fan Black

 

 

 

• Receiver Red: “FAN OUT”

 

F

• Receiver White: “COMMON OUT”

 

 

• Fan White

 

 

 

 

 

Steps 4-34-7

 

 

 

Large Wire

Small Wire

 

 

 

Connector

Connector

All wiring must be in accordance with national and local electrical codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualified electrician.

4-1. Make sure the power is still off.

4-2. To connect the wires, hold the bare metal leads together and place a wire connector over them, then twist clockwise until tight. For all these connections use the wire connectors provided.

Manual background CAUTION: Be sure no bare wire or wire strands are visible after making connections.

4-3. Connect the ground wire from the ceiling to the green ground wire from the ceiling plate and the green ground wire from the downrod or low profile washer.

4-4. Using the large wire connector, connect the white wires and the black wires from the ceiling as follows:

The white (common) power wire from the ceiling to the white wire from the receiver (marked on red tag “NEUTRAL IN”)

The black power wire from the ceiling to the black wire from the receiver (marked on white tag “LIVE IN”)

4-5. Using the small wire connector, connect the wires from the fan as follows:

The black wire from the fan to the red wire from the receiver (marked on red tag “FAN OUT”)

The white wire from the fan to the white wire from the receiver (marked on white tag “COMMON OUT”)

The black/white wire from the fan to the black/white wire from the receiver (marked on white tag “LIGHT OUT”)

4-6. Check each connection to make sure no bare wire or wire strands are visible. Push all wires and wire connectors back through the ceiling plate hole into the outlet box.

4-7. Run the white antenna wire from the receiver around the inside of the canopy for clear reception.

9

42693-01 • 11/11/09 • Hunter Fan Company

Page 9
Image 9
Hunter Fan 42693-01 warranty Wiring the Fan