6 • Assembling the Blades
Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan).
6-1. Your fan may include blade grommets. If your fan has grommets, | |
Step 6-1 (Detail) |
insert them by hand into the holes on the blades. | |
6-2. Attach each blade to a blade iron using three blade assembly screws. If you used grommets, the blades may appear slightly loose after screws are tightened. This is normal.
6-3. Remove the blade mounting screws and rubber shipping bumpers from the motor. Note: Some blade mounting screws are installed in the motor to secure shipping blocks.
| 6-4. For each blade, insert one blade mounting screw through the | Grommet |
| blade iron, and attach lightly to the fan. Insert the second blade |
| | | | | |
| mounting screw, then securely tighten both mounting screws. | | | | | |
| | | Blade Assembly | | | | |
| | | | | Steps 6-1 – 6-2 |
| Use with grommet | Screws | | | | | |
| | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | | |
Use without grommet | |
Blade | Step 6-4 |
Mounting | |
Screw | |
42735-01 • 11/12/06 | Hunter Fan Company |
