Hunter Fan 42800-01 warranty Installing the Glass Bowl, Pull Chain Breakaway Connector, Finial

Installing the Glass Bowl

1.First install two medium base incandescent bulbs.

2.Attach the extra pull chain (included) to the fan pull chain using the plastic breakaway connector. (You may find the plastic breakaway connector on the end of the extra chain.)

3.read the fan pull chain through the hole in the metal disk. en, thread the fan pull chain through the hole in the center of the glass bowl.

4.read the light pull chain through the hole in the center of the glass bowl.

5.Place the cover plate up against the glass bowl. Align the holes in the cover plate and glass bowl.

6.read the fan pull chain and light pull chain through the appropriate holes.

7.read the light pull chain through the finial and screw the finial onto the threaded rod end until tight.

Pull Chain

Breakaway

Connector

for Light Bulbs (60 Watt Maximum)

Metal Rod

Metal Disk

Glass Bowl

Cover Plate

13

Finial

42800-01 • 01/18/06 Hunter Fan Company