Hunter Fan 42800-01 warranty Assembling and Hanging the Fan, Step

3 • Assembling and Hanging the Fan

6

Step 3-1

Square

Hanger

Motor

Assembly

Step 3-2

3-1. Position the square hanger so that the green ground wire attached to the square faces out of the large opening in the metal bracket.

3-2. Holding the wires out of the way, lift the motor assembly and place the square hanger into the opening in the ceiling plate.

WARNING: Make sure the square hanger can not rotate in the metal bracket. Failure to do so could result in the fan falling.

3-3. Install two locking screws through the holes in the side of the metal bracket to secure the square hanger.

Green

Ground Wire

Green

Ground Wire

Step 3-3

Locking Screw

Hunter Fan Company 42800-01 • 01/18/06