Uninstalling the Light Fixture
7-14. To uninstall the light fixture, first disconnect the plug connectors between the black wire and the red wire.
7-15. Disconnect the plug connectors between the two white wires.
7-16. Uninstall the connector and washer from the end of the light fixture inside the lower switch housing.
7-17. Unscrew the threaded rod of the light fixture from the lower switch housing.
7-18. Remove the light fixture from the lower switch housing pulling disconnected wires through the hole in the center of the lower switch housing.
Note: When removing the wires, pull the thin plug connector (male) through first, and then pull the other plug connector (female) through the hole.
7-19. Install the dummy terminals (included in the sack parts) on the two disconnected wires in the lower switch housing.
7-20. Screw the threaded rod into the lower switch housing.
7-21. Screw the cap and finial onto the threaded rod.
Threaded
Rod
Male Dummy | | Cap |
|
Terminal | | |
Female Dummy | | Finial |
Terminal | |
| |
| | |