Installing the Glass Bowl
7-7. First install B10 candelabra bulbs (60 Watt Maximum) into the sockets.
7-8. Thread the light and fan pull chains through the hole in the center of the glass bowl. Then, thread the light pull chain through the hole in the center of the cover plate.
7-9. Thread the fan pull chain through the grommet hole in the side of the cover plate.
7-10. Place the cover plate up against the glass bowl. Align the holes in the cover plate and glass bowl.
7-11. Thread the light pull chain through the finial and screw the finial onto the threaded rod end until tight.
7-12. Attach the extra pull chains (included) to the light and fan pull chains using the plastic breakaway connector. (You may find the plastic breakaway connector on the
end of the extra chain.)
Note: In compliance with Canadian energy regulations, this ceiling fan contains a device that restricts the light kit to a maximum of 190 Watts. Exceeding that limit or the marked limit on this product may result in fire hazard
or improper operation.the troubleshooting section