Hunter Fan 42884-01 installation manual Uninstalling the Light Fixture

7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued)

Uninstalling the Light Fixture

7-13. To uninstall the light fixture, first disconnect the plug connectors between the black wire and the black wire with a white

stripe.

7-14. Disconnect the plug connectors between the two white wires.

7-15.	Uninstall the connector and washer from the end of the	Lower Switch
	light fixture inside the lower switch housing.	Housing
7-16.	Unscrew the threaded rod of the light fixture from the lower
	switch housing.
7-17.	Remove the light fixture from the lower switch housing
	pulling disconnected wires through the hole in the center of	Threaded Rod
	the lower switch housing.

Note: When removing the wires, pull the thin plug connector (male) through first, and then pull the other plug connector (female) through the hole.

7-18. Install the dummy terminals (included in the sack parts) on the two disconnected wires in the lower switch housing.

7-19.	Install the switch housing cap and plug button to the lower
	switch housing.			Steps 7-16 – 7-18
7-20.	Once you have uninstalled the light fixture, continue
	with Step 7‑6.
		Male Dummy
		Terminal	Cap
		Female Dummy
		Terminal	Plug Button

Step 7-19

15

42884-01 • 11/05/09 • Hunter Fan Company