9 • Troubleshooting
Problem: Nothing happens; fan does not move.
1.Turn power on, replace fuse, or reset breaker.
2.Loosen canopy, check all connections according to the wiring the fan section.
3.Check the plug connection in the switch housing.
4.Push motor reversing switch firmly left or right to ensure that the switch is engaged.
5.Pull the pull chain to ensure it is on.
6.Remove the shipping bumpers.
Problem: Noisy operation.
1.Tighten the blade bracket screws until snug.
2.Tighten the blade screws until snug.
3.Check to see if the blade is cracked. If so, replace all the blades.
4.Change to an approved speed control.
5.Be sure that the glass is secure.
6.Check and tighten the screws in the switch housing mounting plate and in the upper and lower switch housing.
Problem: Excessive wobbling.
1.If your fan wobbles when operating, use the enclosed balancing kit and instructions to balance the fan.
2.Tighten all blade and/or blade iron screws.
Problem: Lights turn off when installed or dim when turned on
1.Check to make sure the wattage and type of light bulbs installed match the specifications on the light socket.
Problem: Lights shut off suddenly
1.Turn the power to the fan off at the wall switch. Wait 30 seconds, then resume power to the fan.
If you need parts or service assistance, please call 888‑830‑1326 (In Canada, call
Hunter Fan Company
7130 Goodlett Farms Parkway #400
Memphis, Tennessee 38016
17
