W a r n i n g
TO REDUCE THE RISK OF ELECTRIC SHOCK OR INJURY, OBSERVE THE FOLLOWING:
1)Read all instructions before attempting to install or use this appliance. This appliance is for general ventilating use only. Do not use this appliance for ventilating hazardous or explosive materials. Follow the heating equipment manufacturer’s guideline and safety standards, such as those published by the National Fire Prevention Association (NFPA), and the American Society for Heating, Refrigeration and
2)Before installing, servicing, or cleaning the unit, disconnect the power by turning off the circuit breakers to the outlet box and associated wall switch location. If you cannot lock the circuit breakers in the off position, securely attach a prominent warning device, such as a tag, to the service panel.
3)This unit must be grounded.
4)This appliance is not suitable for tub or shower installation, and must not be installed within a minimum of 3 feet from the tub or shower opening. See Figure A.
5)Do not install this appliance lower than 7 feet (2.13 m) above the floor in the ceiling. See Figure A.
NOTE: This illustration is not to scale
Bath Fan
7 ft. min.
3 ft. min.(2.13 m)
(0.91 m)
Tub or Shower area
Figure A | Continued |
|
