Section A - New Construction - attaching to joist
A1
OR
Pop out a wiring access slug.
A2 |
| |
5/8 | 5/8 | |
1/2 | ||
1/2 | ||
|
A3 |
Position the correct depth mark at the bottom edge of the joist based upon the the thickness of your sheetrock.
Drive mounting screws (supplied) into joist or framing.
A4
3”
A5 |
Run the power supply wire through the strain relief, leaving |
| Install the wiring and the strain relief into the wiring access | |
3” between the end of the wire and the strain relief. Tighten |
| hole you made earlier. | |
the strain relief around the wire. |
|
|
|
| 6 |
| |
43044- |
|
| |
01 | 03/05/2008 | ||
