Setting Up Your Air Purifier
1.Take the Air Purifier out of the box and remove the clear plastic protective bag and place the unit on a firm, level surface.
2.Before turning on the Air Purifier, you need to confirm that the filters are firmly in place and have not become loose during shipping. To check the filters, push down on the tab under the handle. Figure 1.
3.Gently pull the rear grill away from the unit and lift away. Figure 2.
4.The washable
5.The HEPA Filters will be resting inside the unit. If present, remove the plastic bag surrounding the filter and place the filters back into the Air Purifier. The filters should have arrows on the side to indicate air flow and the direction the filter should be placed back into the unit. Figure 3.
6.Set the tab on the bottom of the rear grill into the slot in the base of the unit and rock the grill up until the top tab snaps into place. Figure 4.
7.Plug the unit into a 120V electrical outlet.
Tab
Figure 1.
Figure 2.
HEPA Filters
Figure 3.
Figure 4.
©2010 Hunter Fan Co. | 5 |
