Note: Oils from your skin can cause damage to the bulb and will prevent it from working.
7.Using the bag the bulb came in to prevent skin contact with the bulb, insert the base of the bulb into the lower UVC socket in the unit, with the flat side of the base facing the opening of the unit. Figure 13.
8.Insert the top part of the UVC bulb into the top socket and roll the bulb to the right util it locks into place.
Note: If the UVC Bulb Guard is not
9.Reattach the UVC Guard by inserting the back tabs into the Air Purifier and secure the 3 screws holding it back in place. Figure 14.
10.Align the Photocatalytic Screen over the 2 holes in the unit and screw it back into place.
11.Set the tab on the bottom of the rear grill into the slot in the base of the unit and rock the grill up until the top tab snaps into place.
Clean the Unit
Clean the outside of the unit with a soft, damp cloth. The rear grill can be cleaned in soapy water after it has been removed from the unit and the
NOTE: Ensure the grill is completely dry before reinstalling it on the unit. Failure to do so could cause damage to the filters or motor.
Figure 12.
Figure 13.
Figure 14.
Figure 15.
©2010 Hunter Fan Co. | 9 |
