Hunter Fan 45013-01 installation manual Installing the Glass Bowl

7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued)

Installing the Glass Bowl

7-8. First install B10 candelabra bulbs (60 Watt Maximum) into the sockets.

7-9.

7-10.

7-11.

7-12.

7-13.

7-14.

7-15.

7-16.

If the fandangle is attached to the extra pull chain, remove it now.
Attach the extra pull chain (included) to the fan pull chain using	Breakaway
the plastic breakaway connector. (You may find the plastic	Connector
breakaway connector on the end of the extra chain.)
Thread the fan pull chain through the hole in the metal disc. Then,
thread the fan pull chain through the hole in the center of the glass
bowl.
Thread the light pull chain through the hole in the center of the
glass bowl. Then, Thread the light pull chain through the hole in
the center of the cover plate.
Thread the fan pull chain through the grommet hole in the side of	Light Bulb
the cover plate.
	Sockets
Place the cover plate up against the	(B10
glass bowl. Align the holes in the cover	Candelabra-
	Based 60 Watt
plate and glass bowl.	Maximum)
Thread the light pull chain through	Metal Disc
the finial and screw the finial onto the
	Metal Rod
threaded rod end until tight.
Reattach the fandangle to the extra pull
chain.	Glass Bowl
	Cover Plate
	Finial

12

45013-01 • 01/28/10 • Hunter Fan Company