Hunter Fan 45013-01 installation manual Uninstalling the Light Fixture

7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued)

Uninstalling the Light Fixture
7-17. To uninstall the light fixture, first disconnect the plug
	connectors between the black wire and the black/white wire.
7-18. Disconnect the plug connectors between the two white wires.
7-19. Remove the two screws attaching the light kit to the lower
	switch housing.
7-20.	Remove the light fixture from the lower switch housing, pulling
	disconnected wires through the hole in the center of the lower
	switch housing.
	Note: When removing the wires, pull the thin plug connector
	(male) through first, and then pull the other plug connector
	(female) through the hole.
7-21.	Install the dummy terminals (included in the sack parts) on the
	two disconnected wires in the lower switch housing.
7-22.	Install the switch housing cap and plug button to the lower
	switch housing.
7-23.	Once you have uninstalled the light fixture, continue
	with step 7‑6.	Step 7-19

Lower Switch Housing

Screw

Male Dummy

Terminal

Female Dummy Terminal

Cap

Plug Button

Step 7-22

13

45013-01 • 01/28/10 • Hunter Fan Company