Installing the Glass Bowl
7-1.If you want to install the light fixture, proceed with Step 7-2 now.
If you do not want to install the light fixture, you need to uninstall it now. See “Uninstalling the Light Fixture” in Step 7-9.
7-2. First install B10 candelabra bulbs (60 Watt Maximum) into the sockets.
7-3. Attach the extra pull chain (included) to the fan pull chain using the plastic breakaway connector. (You may find the plastic breakaway connector on the end of the extra chain.)
7-4. Thread the fan pull chain through the hole in the metal disk. Then, thread the fan pull chain through the hole in the center of the glass bowl.
7-5. Thread the light pull chain through the hole in the center of the glass bowl.
7-6. Thread the fan pull chain through the grommet hole in the side of the cover plate. Then, Thread the light pull chain throught the hole in the center of the cover plate.
7-7. Place the cover plate up against the glass bowl. Align the holes in the cover plate with the grommet hole of the metal disk.
7-8. Thread the light pull chain through the finial and screw the finial onto the threaded rod end until tight.