Hunter Fan installation manual 45057-01 06/24/09 Hunter Fan Company

7 • Completing Your Installation With a Light Fixture (Continued)

7-5. To attach the light kit, connect the upper plug connector from the motor to the lower plug connector in the light kit.

Note: Both plug connectors are polarized and will only fit together one way. Make sure the connectors are properly aligned before connecting them. Incorrect connection could cause improper operation and damage to the product.

7-6. Partially install two housing assembly screws into the light kit top housing.

7-7. Align the keyhole slots in the housing with the housing assembly screws.

7-8. Turn the light kit counterclockwise until the housing assembly screws are firmly situated in the narrow ends of the keyhole slots. Install the remaining screw into the housing. Tighten all three screws firmly.

Light Kit

Steps 7-5

Housing

Assembly

Screw

Keyhole

Slots

Steps 7-6-7-8

Housing

Assembly

Screw

Light	Plug
	Connector
Kit Top	Detail
Housing
Light Kit

Note: In compliance with US federal energy regulations, this ceiling fan contains a device that restricts the light kit to a maximum of 190 Watts. Exceeding that limit or the marked limit on this product may result in fire hazard or improper operation.

11

45057-01 • 06/24/09 • Hunter Fan Company