Hunter Fan installation manual 45062-01• 07/01/09 • Hunter Fan Company

7 • Completing Your Installation With a Light Fixture

Your Hunter fan comes with an integrated light fixture assembly.

WARNING: Use only the light fixture supplied with this fan model.

7-1. To attach the light kit top housing, partially install two housing assembly screws into the light kit mounting plate.

7-2. Connect the upper plug connector from the motor to the lower plug connector in the light kit.

Note: Both plug connectors are polarized and will only fit together one way. Make sure the connectors are properly aligned before connecting them. Incorrect connection could cause improper operation and damage to the product.

7-3. Align the keyhole slots in the housing with the housing assembly screws.

7-4. Turn the light kit top housing counterclockwise until the housing assembly screws are firmly situated in the narrow ends of the keyhole slots. Install the remaining screw into the housing. Tighten all three screws firmly.

CAUTION: Make sure the light kit top housing is securely attached to the light kit mounting plate. Failure to properly attach and tighten all three assembly screws could result in the light kit top housing and light fixture falling.

Light Kit

Mounting

Plate

Light

Kit Top

Housing

Housing

Assembly

Screw

Step 7-4

10

45062-01 • 07/01/09 • Hunter Fan Company