6 • Installing the Canopy and Canopy Trim Ring
6-1. Partially install two canopy screws (about 2 full turns) in the hanger bracket.
6-2. Raise the canopy over the hanger bracket. Align partially installed screws with key slots in canopy.
6-3. Twist canopy clockwise to secure.
Steps 6-1 – 6-2 | Hanger Bracket |
6-4. Install third & fourth canopy screw in round hole on canopy. Securely tighten all four screws.
6-5. Using both hands, push the canopy trim ring up to the top of the canopy.
6-6. Twist canopy trim ring clockwise to secure the canopy.
Should you need to remove the canopy trim ring, follow these steps:
1.Twist canopy trim ring counter clockwise until it releases from canopy.
45062-01 • 07/01/09 • Hunter Fan Company
