7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued)
Installing the Glass Bowl
7-8. First install B10 candelabra bulbs (60 Watt Maximum) into the sockets.
7-9. Thread the light and fan pull chains through the hole in the center of the glass bowl. Then, thread the light pull chain through the hole in the center of the cover plate.
7-10. Thread the fan pull chain through the grommet hole in the side of the cover plate.
7-11. Place the cover plate up against the glass bowl. Align the holes in the cover plate and glass bowl.
7-12. Thread the light pull chain through the finial and screw the finial onto the threaded rod end until tight.
7-13. Attach the extra pull chains (included) to the light and fan pull chains using the plastic breakaway connector. (You may find the
plastic breakaway connector on the end of the extra chain.)
Note: In compliance with U.S. Federal energy regulations, this ceiling fan contains a wattage saver that restricts the light kit to
a maximum of 190 Watts. Exceeding that limit or the specifications on the light sockets may result in fire hazard or improper operation. If lights do not appear to be operating properly, see the troubleshooting section
Light Bulb |
Socket |
(B10 |
Candelabra |
Based 60 Watt |
Maximum) |
Metal Disc |
Threaded Rod |
Glass Bowl |
Cover Plate |
Finial |
45065-01 • 11/05/09 • Hunter Fan Company