Blades
Insert grommets found in the
hardware
bag into the holes in the blades, then secure each blade to a blade iron with screws found in the
hardware bag.
www.HunterFan.com 1.888.830.1326 
Remember the screws that
you kept after removing the
shipping blocks (page 6)? You 
need them for this
step.
Lightly attach the blade irons to the motor with the blade iron armature screws, then securely tighten after both screws are attached.
Your blades are shielded with Dust Armor® which is a nanotechnology coating that repels dust. For cleaning the fan, use soft brushes or cloths to prevent scratching. Cleaning agents may damage the finishes.
12
