Light Kit | www.HunterFan.com |
1.888.830.1326
Switch
Housing
Screw
Switch
Housing Notch 
Screw
Partially install two of the switch housing | Align the notches in the sides of the lower | Install the third switch housing screw. |
screws found in the bag. Connect | switch housing with the upper switch | Tighten all three screws securely. |
the plugs from the upper and lower | housing screws. Lift the lower switch housing. |
|
switch housings. Make sure to line up the | Twist the lower switch housing clockwise to |
|
colored markings on the connectors. | lock into place. Then thread the fan pull chain |
|
| through the hole in the light kit. |
|
Want to install your fan without a light kit? |
| Make sure the lower switch housing is securely attached to |
Go to www.HunterFan.com/FAQs and click |
| the upper switch housing. Failure to properly secure all three |
“How do I install my fan without the light kit?” | 14 | assembly screws could result in the light fixture falling. |
|
