Hunter Fan 53114, 53116, 53115, 53117 operation manual Downrod continued, 3/8”, Hand Tighten

Models: 53117 53115 53116 53114

1 20

Page 8

www.HunterFan.com

1.888.830.1326

Remove the pre-installed

setscrew so that the downrod

can be inserted.

Hand tighten the downrod (at least 4-5 full turns) until it stops.

8”

The wires can be cut, but leave at least 8” extending from the top of the downrod.

Tighten the setscrew with pliers. DO NOT

If the setscrew is not tightened securely, the fan may fall.

Image 8

Contents

Table of Contents What to Expect with Your Installation 1 Standard Downrod2 Shorter Downrod 3 Longer DownrodTools Needed Wire StrippersPower Drill optional LadderMounting Options OPTIONFOLD PLACE SLIDE OPTIONCeiling Bracket Use wood screwsUse machine screws M0069-01 04/30/13 Hunter Fan CompanyCeiling Bracket continued PreparationDownrod OptionSteps 1-5to remove standard downrod pipe Steps 6-10to reassemble with new pipeHAND TIGHTEN Downrod continued3/8” CANOPY OR WIRES. Place the downrod Downrod continuedDO NOT PICK THE FAN UP BY THE the canopy. Let the canopy sit looselyWiring Canopy HolesScrew M0069-01 04/30/13 Hunter Fan CompanyBlades Switch Housing Want to install your fan without a light kit? Switch Housing Notch ScrewLight Kit Light Kit continued See next page for fan operation instructionsShade BulbRemote Control Remote Control continued See next page for fan operation instructionsOperation, Maintenance, & Cleaning Operation, Maintenance, & Cleaning continued Safe-ExitTroubleshooting Remote control of fan is erraticTransmitter only works when held at close range Fan doesn’t work