Existing Construction – accessible from above
C11 | EXISTING FAN |
NO EXISTING FAN
OR
Remove an existing fan and check to make sure the | Use the motor housing as a template to mark position. |
opening is large enough to accommodate the new |
|
motor housing (8”x 8 1/2”). |
|
|
|
| ” |
|
| /2 | |
8” | 8 | 1 |
|
|
| ||
|
|
| |
Cut out an opening for the housing.
C13
5/8 | 5/8 | |
1/2 | ||
1/2 | ||
|
C12 |
F |
E |
Slide the mounting rails into brackets.
C14
Position the correct depth mark at the bottom edge of the
joist based on the thickness of your sheetrock.
Mark position of screws by using holes as a template.
11
3/29/06 3:19:24 PM
