![](/images/backgrounds/84309/84309-607x1.png)
A17 | A18 |
| I |
Connect wiring harness. DO NOT ALLOW THE MOTOR TO | Reinstall the motor by inserting the tabs and pushing up |
HANG FROM THE WIRING HARNESS. | into position. Make sure the wires are not pinched |
| between the motor and the housing. |
A19 | A20 |
J
Secure the motor by tightening the 2 screws.
Turn on the power source.
A21 | A22 | Go to step |
ON |
| |
| E1 | |
|
| |
OFF |
| on page 17 |
Test the motor. If the motor does not run, check the plug
connection.
7 |