|
|
|
|
|
|
B4 |
|
| B5 | 1/16” bit | |
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
Mark position of screws by using holes as a template.
Drill a pilot hole at the TOP of each outline.
B6
Insert mounting screws, leaving space between the screw head and the joist. (Screws are supplied.)
B8
Tighten screws.
B7 |
Attach the rails onto the screws.
B9 |
3” |
Run the power supply wire through the strain relief, leav- ing 3” between the end of the wire and the strain relief.
Tighten the strain relief around the wire.
8 |
