Existing Construction – accessible from above
C11 | EXISTING FAN |
OR
NO EXISTING FAN
Remove an existing fan and check to make sure the | Use the motor housing as a template to mark position. |
opening is large enough to accommodate the new |
|
motor housing (9”x 9.75”). |
|
|
|
| 5” |
|
| 7 | |
9” | . |
| |
9 |
|
| |
|
|
| |
Cut out an opening for the housing.
C13
5/8 | 5/8 | |
1/2 | ||
1/2 | ||
|
C12 |
F |
E |
Slide the mounting rails into brackets.
C14
Position the correct depth mark at the bottom edge of the
joist based on the thickness of your sheetrock.
HF0022_Eng_3.13.06.indd 11
Mark position of screws by using holes as a template.
11
3/12/06 6:03:15 PM
