Storage Troubleshooting
ENGLISH
1.To store the fan, disassemble the Front and Back Grilles, remove the Blade Assembly, and clean the entire fan with a damp cloth.
2.ALWAYS store the fan in a dry place.
3.NEVER store the fan while it is still plugged in.
4.NEVER wrap the cord tightly around the fan.
5.DO NOT put any stress on the cord where it enters the fan, as it could cause the cord to break.
PRObleM
• Fan will not work.
SOlUtiOn
•Make sure the interlock switch is properly installed as directed in the assembly instructions. (see page 9)
PRObleM
• Fan will not oscillate.
SOlUtiOn
•Push down on knob on top of mo- tor housing to activate oscillation. (see page 10)
PRObleM
•Can not adjust the angle of the fan.
SOlUtiOn
•Loosen the screw on the side of the fan neck. Adjust to the desired angle and tighten the screw. (see page 10)
If you have tried these troubleshooting solutions and still have trouble, visit our Web site at http://www.hunterfan.com.
HUNTER FAN COMPANY
®2500 FRISCO AVENUE MEMPHIS, TN 38114, USA
Printed in China
12 |