Operation
Off / Speed Selection
To turn the fan on and off / control the speed. Turn the speed knob on the top of the motor to the porper setting. Figure 19.
Oscillation
To allow the fan to oscillate, push the Knob beside the fan speed control down. Pull up on the knob if oscillation is not desired. Figure 20.
Adjustment
To adjust the angle the fan is blowing.
1.Loosen the adjustment knob under the Fan Motor
2.Adjust the fan to the angle desired and retighten the knob to secure the fan at that angle. Figure 21.
When adjusting the height of the fan, always grip the pole above the adjustment knob firmly to prevent the telescoping pole from collapsing.
Low
Medium
OffHigh
Figure 19.
Figure 20.
Figure 21.
©2010 Hunter Fan Co. | 11 |
