7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued)

Uninstalling the Light Fixture

7-15. To uninstall the light fixture, first disconnect the plug connectors between the black wire and the black/white wire.

7-16. Disconnect the plug connectors between the two white

 

wires.

 

7-17. Uninstall the connector and washer from the end of the

Lower Switch

light fixture inside the lower switch housing.

7-18. Unscrew the threaded rod of the light fixture from the lower

Housing

 

switch housing.

 

7-19. Remove the light fixture from the lower switch housing

 

pulling disconnected wires through the hole in the center of

 

the lower switch housing.

Threaded Rod

Note: When removing the wires, pull the thin plug

 

connector (male) through first, and then pull the other plug

 

connector (female) through the hole.

 

7-20. Install the dummy terminals (included in the sack parts) on

 

the two disconnected wires in the lower switch housing.

 

7-21. Install the switch housing cap and plug button to the lower

 

switch housing.

 

7-22. Once you have uninstalled the light fixture, continue

Steps 7-177-19

with step 76.

 

Male Dummy

 

 

Terminal

 

Cap

Female Dummy

 

 

Terminal

 

Plug Button

Step 7-21

13

42859-01 • 04/24/09 • Hunter Fan Company