3 • Assembling and Hanging the Fan
Step 3-1
Square
Hanger
Motor
Assembly
Step 3-2
3-1. Position the square hanger so that the green ground wire attached to the square faces out of the large opening in the metal bracket.
3-2. Holding the wires out of the way, lift the motor assembly and place the square hanger into the opening in the ceiling plate.
WARNING: Make sure the square hanger can not rotate in the metal bracket. Failure to do so could result in the fan falling.
3-3. Install two locking screws through the holes in the side of the metal bracket to secure the square hanger.
Green
Ground Wire
Green
Ground Wire
Step 3-3
#8-32 x 1” Screw
Locking Screw
6
42859-01 • 04/24/09 • Hunter Fan Company
